Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Uke #2 is completed!
http://www-.luthiersforum.com/forum/viewtopic.php?f=10128&t=49205		 Page 1 of 1
Author:  bcombs510 [ Sun Apr 02, 2017 5:42 pm ]
Post subject:  Uke #2 is completed!
I just finished up my second Uke. A Tenor from the GLS 12 fret Tenor plan.

African Mahogany Top, back and sides.
Ebony binding, bridge, rosette and headplates.
Pegheds tuning pegs.
My first attempt at a side sound port.

I don't play ukulele so I can't really tell how it plays other than strumming a few chords. It seems pretty loud. I don't know if that's the soundport or just the size, but it's definitely louder than the Bocote Build I finished a few months back. I learned a lot from this one. I used a new neck attachment that David Farmer helped with (thanks again for the pics :)).

Image

Image

Image

Image

Image

Thanks for all the help in the forum!

Brad

Edited to add: Clearly I need to mow my grass, but there is too much to do!



Sent from my iPhone using Tapatalk
Author:  johnparchem [ Sun Apr 02, 2017 6:24 pm ]
Post subject:  Re: Uke #2 is completed!
Nice elegant looking uke!
Author:  Quine [ Mon Apr 03, 2017 11:14 am ]
Post subject:  Re: Uke #2 is completed!
Very nice. Is that an open-pore finish or satin? Looks nice
Author:  bcombs510 [ Mon Apr 03, 2017 12:43 pm ]
Post subject:  Re: Uke #2 is completed!
Quine wrote:
Very nice. Is that an open-pore finish or satin? Looks nice


It's just tung oil. I'm sure I'll apply it a couple more times before delivery and smooth it out a bit. I need to learn to French polish. :)
Author:  Ben-Had [ Mon Apr 03, 2017 1:50 pm ]
Post subject:  Re: Uke #2 is completed!
Very nice Brad. Can you share your neck attachment process?
Author:  Hesh [ Mon Apr 03, 2017 2:20 pm ]
Post subject:  Re: Uke #2 is completed!
Very nice Brad!!!!
Author:  bcombs510 [ Tue Apr 04, 2017 5:59 am ]
Post subject:  Re: Uke #2 is completed!
Ben-Had wrote:
Very nice Brad. Can you share your neck attachment process?


I thought I would check with David first before sharing. He's good with it, so here it is: https://goo.gl/photos/PhEbFhSbHbLQMCCT9

I liked this a lot better than the threaded insert. It feels bomb proof. For the uke I used a single rod as you can imagine, but the idea is the same.

Brad
Author:  david farmer [ Tue Apr 04, 2017 6:46 am ]
Post subject:  Re: Uke #2 is completed!
Nice!
I like your style Brad.
I'm certain those Peghead tuners will work better than the many old Uke friction tuners I see.
Author:  bcombs510 [ Thu Apr 06, 2017 6:54 am ]
Post subject:  Re: Uke #2 is completed!
Here is a link to a video of the uke being played by my sons guitar teacher, who happens to also be a great uke player. :)

https://1drv.ms/u/s!AqpMOPRCiq5ajJEghJXhr3ZGynolAA
Author:  Glenn_Aycock [ Fri Oct 13, 2017 7:11 pm ]
Post subject:  Re: Uke #2 is completed!
Brad,

Nice pictorial. What's the dowel for (perpendicular to the neck) in the heel? I've never built a user before...

Thanks,
Glenn


Sent from my iPad using Tapatalk Pro
Author:  Glen H [ Fri Oct 13, 2017 7:20 pm ]
Post subject:  Re: Uke #2 is completed!
Very nice! Clearly a great job.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/